Guwei MFG-2110 arbitrary waveform signal generator multi-channel arbitrary waveform signal generator, including the basic MFG-21XX and advanced MFG-22XX series.
MFG-21XX series, its output includes a single channel 10M/20M/30M/60MHz arbitrary waveform signal generator output; 25MHz pulse signal generator; 160MHz or 320MHz RF generator (MFG-2160MF/MFG-2160MR) and power amplifier (MFG-2120MA only); MFG-22XX series,
Including a dual channel arbitrary waveform signal generator output with performance of 30MHz/60MHz, and a 25MHz pulse signal generator; 160MHz or 320MHz RF generator (MFG-2260MFA/MFG-2260MRA) and power amplifier (MFG-2260MFA/MFG-2260MRA only)
The MFG-2000 series can output up to 5 types of channels simultaneously (MFG-2260MFA/MFG-2260MRA), including CH1 and CH2 as two equal performance dual channel AFGs (arbitrary waveform signal generators) with a frequency of 60MHz; The RF generator, in addition to being a standard AFG, can also generate up to 320MHz and various modulated RF signals in the sine wave section
; Pulse signal generator, with a frequency of up to 25MHz; A power amplifier is an amplifier suitable for the audio range. These 5 different functional channels are distributed across 10 models, starting from the most basic single channel AFG and pulse signal generator, to models with 5 channels at the same time, which can meet various fields of teaching and industrial applications.
The AFG channel in MFG-2000 can output sine, square, and triangular waves Common waveforms, such as 200MHz/s sampling rate, 100MHz waveform repetition rate, 14-bit resolution, and 16k point storage depth, have the "true point by point output" arbitrary waveform characteristics;
Some models have functions such as AM/FM/PM/FSK/PWM modulation, Sweep, Burst, Trigger, and 150MHz Frequency Counter.
The synchronous dual channel model can generate correlation signals between the CH1 and CH2 output signals, including synchronization, delay, addition, and channel coupling. The RF generator is a fully functional AFG signal source (including ARB), with various modulation, Sweep and other functions, as well as digital modulation such as ASK and PSK, and a sine wave frequency of up to 320MHz.
The 25MHz pulse generator is standard equipment, and the pulse generator that can output independently is a fully functional pulse signal source. In addition to the general adjustable pulse width, its Leading and Trailing Edge Time is adjustable, which can be used as a trigger signal application. The power output can reach 20W and the amplification rate can reach 20dB. The independent input/output power amplifier has a DC-100KHz bandwidth,<0.1% low distortion, and can be used for audio signal applications.